12 Feb Vasaris 12
Here is a very common prompt that ask you to restart computer after installing software or updates using InstallShield. Čia yra labai dažnas greitai, kad prašyti iš naujo paleisti kompiuterį įdiegus programinę įrangą ar atnaujinti naudojant InstallShield. It says “InstallShield Wizard Complete. Jis sako "Diegimo vedlys Baigti. Setup has finished installing XXXXXX on your computer.” You have 2 options to select that is “Yes, I want to restart my computer now” or “No, I will restart my computer later.” Sąranka baigta diegti XXXXXX kompiuteryje. "Jūs turite 2 galimybes pasirinkti, kad yra" Taip, aš noriu paleisti mano kompiuteryje dabar "arba" Ne, aš iš naujo savo kompiuterį vėliau. " 
Here is how you can decide whether to restart or not when you're prompted to. Štai kaip jūs galite nuspręsti, ar paleisti ar ne, kai būsite raginami.
The most common reason to require a reboot after an installation is to update or delete a file that is currently open (or otherwise in use) by the operating system or running software, such as a core component of the system, or the binary executable file that is used by an application that was running during the install (which is why most installers always advise you to close all Windows programs before installing — some are nice enough to list running applications that may cause problems, and ask you to close them before continuing.) So, if files that are currently in use must be replaced, a method must be found to do so after the files are no longer in use. Dažniausiai pasitaikanti priežastis reikalauti perkrovimo po diegimo yra atnaujinti arba ištrinti failą, kuris šiuo metu yra atidaryti (ar kitaip naudoti) operacinė sistema ar atlikti programinės įrangos, kaip antai pagrindinė sudėtinė sistema, arba binary executable failas kad yra naudojama programa, kuri buvo rodomi per install (štai kodėl dauguma montuotojų visada patars uždaryti visas programas Windows Prieš diegdami - kai kurie gražūs pakankamai sąrašą aktyvias programas, kurios gali sukelti problemų, prašome uždaryti prieš tęsiant .) Taigi, jei failų, kurie šiuo metu naudojami, turi būti pakeistas, metodas turi būti nustatyta, kad tai padaryti po failai nebenaudojami. Another reason to reboot the computer is to allow the installer to clean up after itself. Dar viena priežastis, perkrauti kompiuterį, kad montuotojas išvalyti po savęs.
The simple solution is to record an entry in a special location defined by Windows that will allow the file(s) to be copied, renamed, or deleted after the system reboots but before most of Windows is loaded (or any user applications start.) It is this method that most installer systems use. Paprastas sprendimas yra įrašyti į specialią vietą nustatyta, kad "Windows leis failas (-ai) turi būti draudžiama kopijuoti, pervardyti arba panaikinti po reboot system, tačiau prieš didžiąją Windows pakraunami įrašas (arba bet kokio vartotojo programas paleisti). Būtent šį metodą, kad dauguma montuotojas sistemų naudojimą.
WhyReboot is a small (100KB) Windows application that helps you decide whether to reboot your computer after running an installer. WhyReboot yra maža (100kb) Windows programa, kuri padės Jums nuspręsti, ar reikia iš naujo paleisti kompiuterį paleidus montuotojas. It does this by displaying a list of “pending file operations” (rename, delete, etc) that will occur after rebooting your computer. Jis tai daro, rodydami į "Kol byla operacijų sąrašą" (Pervardyti, Trinti, ir tt), kad įvyks naujo paleidus kompiuterį.
Here is an example of a prompt that ask me to restart my computer after installing Kaspersky Anti-Virus program. Štai ir greitai, kad paklausti iš naujo paleisti kompiuterį įdiegus mano Kaspersky Anti-Virus programos pavyzdys. It says “You must restart to complete the installation/uninstallation of Kaspersky Anti-Virus 7.0. Ji sako: "Tu turi iš naujo, siekiant užbaigti diegimą / pašalinimą iš Kaspersky Anti-Virus 7.0. Click Yes to restart now or No if you plan to restart later. Spustelėkite Taip, norėdami iš naujo paleisti arba Ne, jei planuojate paleisti vėliau. 
Now I run WhyReboot to see why Kaspersky wants me to reboot. Dabar galiu paleisti WhyReboot suprasti, kodėl Kaspersky nori mane paleisti. 
As you can see, Kaspersky is unable to delete some files in temporary directory created during installation. Kaip matote, Kaspersky negali ištrinti kai laikinai katalogas sukurtas per įdiegimo failus. When I restart, the _u14D2N.tmp, Au_.exe and ~nsu.tmp will be deleted. Kai aš iš naujo, _u14D2N.tmp, Au_.exe ir ~ nsu.tmp bus ištrinta. Since restarting Windows only deletes 3 temporary files, it is NOT important nor critical to restart my computer immediately. Kadangi paleisti Windows tik pašalina 3 laikinuosius failus, tai nėra svarbu, nei kritiškai paleisti mano kompiuteris tuoj.
[ [ Download WhyReboot Parsisiųsti WhyReboot ] ]
Technorati Tags: Technorati Tags: restart paleisti , , reboot reboot , , whyreboot whyreboot , , windows langai
: Copying this article to your website is strictly NOT allowed. Kopijavimo šį straipsnį savo svetainėje yra griežtai NOT allowed. However, if you like this article, you can use the HTML code below to directly link to this article. Tačiau, jei jums patinka šis straipsnis, galite naudoti HTML kodą į tiesiogiai su nuoroda į šį straipsnį. Password to Uninstall Symantec Antivirus Client Slaptažodis Pašalinti Symantec Antivirus Client How To Uninstall or Remove Bonjour mDNSResponder.exe Dezinstalacja arba šalinti Bonjour mDNSResponder.exe YouTube Videos Not Playing Properly in Google Chrome and Firefox YouTube Video not playing Tinkamai Google Chrome ir Firefox Uninstall Microsoft .NET Framework with Aaron Stebner Cleanup Tool Pašalinti Microsoft. NET Framework Aaron Stebner valymo priemonė How To Disable, Uninstall or Remove Windows Defender in Vista Kaip išjungti, pašalinti arba šalinti Windows Defender Vista How To Uninstall F-Secure Antivirus or Internet Security 2007 Kaip pašalinti "F-Secure Antivirus ar Internet Security 2007 Uninstall Microsoft Office 2007 in Vista and XP Pašalinti "Microsoft Office 2007 Vista ir XP
Have computer technical problems? Ar kompiuteris techninių problemų? Get FREE help from Raymond.CC FORUM Gauti nemokamą pagalbą nuo Raymond.CC FORUMAS
12 Responses for "Why Are You Asked to Restart After Install or Uninstall Software?" 12 Atsakymai dėl "Kodėl jūs paprašėte naujo paleisti po įrengimo arba pašalinti programinę įrangą?"
Limitations: Apribojimai:
WhyReboot cannot report file operations that may be carried out by programs configured to run automatically every time you start the computer (HKLM\\\\Software\\\\Microsoft\\\\CurrentVersion\\\\Run), or a user logs in (HKCU\\\\Software\\\\Microsoft\\\\CurrentVersion\\\\Run) WhyReboot negali failo ataskaitą operacijos, kurios gali būti atliekami pagal programas sukonfigūruotas automatiškai kiekvieną kartą paleidus kompiuterį (HKLM \ \ Software \ \ \ \ Microsoft \ \ \ \ CurrentVersion \ \ Run), ar vartotojo Įrašai in (HKCU \ \ \ \ Software \ \ \ \ Microsoft \ \ \ \ CurrentVersion \ \ \ \ Run)
Currently, it does not report changes in driver, program, or service state that require a reboot in order to take effect: for instance, if an installer copies new drivers, programs, or services onto your system and configures the system so that these will be started automatically at boot or login, your system will have to be restarted. Šiuo metu nėra pranešimą pokyčiai vairuotojas, programą arba paslaugą, kad reikia iš naujo paleisti kompiuterį, kad būtų atsižvelgta poveikis: pavyzdžiui, jei montuotojas kopijas naujas tvarkykles, programas ar paslaugas į sistemą ir leidžia nustatyti sistemą taip, kad jie bus būti pradedamas automatiškai atsisiųsti arba prisijunkite, jūsų sistema turi būti iš naujo. These changes are not detected by WhyReboot. Šie pokyčiai neaptinka WhyReboot.
While it may be possible to detect these kinds of system changes, this is beyond WhyReboot\\\'s scope at this time. Nors tai gali būti įmanoma nustatyti šios sistemos pakeitimus rūšių, tai ne WhyReboot \ \ \ 's taikymo sritis šiuo metu.
Downloads are stored in a temporary folder on your PC until they are required so they will not cause any problem with work you are in the midst of. Atsisiuntimai saugomi laikinąjį aplanką savo kompiuteryje, kol jie yra reikalingi, kad jie nesukels jokių su darbo problema esate Viduryje. Click ” Restart later” and then finish off and save work you are doing before rebooting. Paspauskite mygtuką "Restart vėliau" ir tada pribaigti ir išsaugoti darbą darai iki sistemos perkrovimo. Create a `Restore point' before you reboot in case the downloaded file does cause a problem so that the PC can be restored to its state prior to installing the file. Sukurti "Restore punktas" prieš jus paleisti, jei atsisiųsta rinkmena nėra sukelti problemą, kad kompiuteryje gali būti grąžinta į savo būsenos prieš diegdami failas. In vista a restore point is created automatically prior to any new downloaded file installation Vista atkurti taškas yra sukuriamas automatiškai, prieš kiekvieną naują atsisiųstą failą įrenginys
Hi Raymond ! Hi Raymond!
I have read your few articles. Aš perskaičiau keletą jūsų straipsnių. I like your blog. I like your blog. This is first time i am liking anyone's blog. Tai yra pirmas kartas aš mylėti kam nors blogas. This blog Full of usefull information regarding computing. Šis dienoraštis naudingos informacijos apie kompiuterius. Keep it up…! Keep it up ...!
Nice Gražus
I use Revo Uninstaller(Freeware) to take care of my uninstalling of progs. Aš naudoju Revo Uninstaller (Freeware) rūpintis savo pašalinimas iš progs. It also took care of removing the prog in the registry. Jis taip pat rūpinosi panaikinti registro prog. I think it should work to remove WGA (??) Manau, ji turėtų stengtis pašalinti WGA (?)
always nice to know why we have to reboot, thanks Visada malonu žinoti, kodėl mes turime paleisti, ačiū
But but but the PendingFileRenameOpeartions is _not_ the only reason why the installer/uninstaller would want you to reboot the computer. Bet bet bet PendingFileRenameOpeartions _not_ yra vienintelė priežastis, kodėl installer / Uninstaller norėtų, kad reikia perkrauti kompiuterį.
For example, an installer may not start the program's services but wait until they are auto-started upon reboot–so you would have to know to start them. Pavyzdžiui, montuotojas negali paleisti programos paslaugas, bet laukti, kol jie yra auto prasidėjo nuo perkrovimo, todėl jūs turite žinoti, kad pradėti juos. Or some drivers simply cannot be started in place but will need to be detected and run during the right time in the boot sequence. Arba kai kurie vairuotojai tiesiog negali būti pradėtas vietą, bet reikės nustatyti ir paleisti per tinkamą laiką ir boot seka.
Or, an uninstaller may be unable to remove services due to certain program windows open (eg the Services MMC), and thus they won't be removed until reboot… and if you need to re-install, it's a bad idea to do that now because even if that service installs again, it will be deleted the next time you reboot! Arba Uninstaller gali būti neįmanoma pašalinti tarnybos dėl tam tikrų programos langus (pvz., Paslaugos MMC), todėl jie negali būti išvežti iš naujo paleisti ... ir jeigu jums reikia įdiegti iš naujo, tai bloga idėja padaryti, kad dabar, nes net jei ta tarnyba įdiegs vėl, ji bus panaikinta, kai kitą kartą paleisti!
I'm just sayin'… I'm just sayin '...
Thanks for sharing the application. Thanks for sharing taikymas. I never thought of any utility that can do such a job. Niekada nemaniau, bet nauda, kad galima padaryti tokį darbą. Good Find. Geras Rasti.
hey ray, why don't you have a full rss feed? hey ray, kodėl ne jums visiškai RSS? It is easier to reed blogs with full rss feeds on rss readers offline then it is with the ones that have the “read more”/ “read the rest of the entry” link. Lengviau Reed Dienoraščiai visiškai RSS kanalai nuo RSS skaitymo neprisijungęs ten yra su tais, kurie turi "daugiau" / "skaityti" įrašas "nuorodą poilsio.
thanks for the services you dish out though! Dėkojame už paslaugos išdalyti nors!
GBY GBY
The reboot process after any installation is just a OS confirmation steps to register all the registry changes.Whether to click “Restart Now” or “Restart Later” completely depends upon how the important and penetrative the installed thing is. Paleisti po to, kai bet kuris objektas yra tik OS patvirtinti veiksmų registruoti visus registro changes.Whether paspauskite mygtuką "Paleisti iš naujo dabar" arba "Restart Later" visiškai priklauso nuo to, kaip svarbu ir skvarbus įrengti dalykas.
Even the “WhyReboot” software cannot detect some registry changes which are performed by some malicious softwares too. Net "WhyReboot" programinė įranga negali aptikti kai registro pakeitimus, kurie atlieka tam kenksmingos programinės įrangos per.
Still nice post.Keep the good work. Dar malonus post.Keep gerą darbą.
Cheers!!! Cheers!
Please help me with the below questions Prašome padėti man pagal žemiau klausimai
1) Can we stop the shoutdown process for some time. 1) Ar mes galime sustabdyti shoutdown procesas šiek tiek laiko.
2) Which method in Install shield will cause the shut down process. 2) Kuris metodas Įdiekite skydas sukels uždarymo procesas.
3) Can i abort a shutdown process 3) Ar galiu atšaukti išjungimo procesą
@lakshmi @ Lakshmi
1) You mean delay it, or tell it to run later? 1) Ar tai vėlavimas ją, ar pasakyti kad skaičiuoti vėliau?
To delay it, go Winkey+R, then type \”cmd\” Atidėti, eikite Winkey + R, tada tipo \ "cmd \"
Next, type shutdown -s -t XX Toliau įveskite shutdown-s-t XX
XX being the number of seconds you want to delay the shutdown. XX metu sekundžių norite atidėti išjungimo numerį.
2) You mean you want install shield to force a shutdown w/o asking the user? 2) Ar tai jūs norite įdiegti saugos force shutdown W / O klausia vartotojas? Not going to happen. Not going to happen.
3) Yes. 3) Taip. If a shutdown is in progress, it is still possible to abort it. Jei išjungimas vyksta, tai dar galima atšaukti jį. Hit WinKey+R, then type \”shutdown -a\” Rezultatas WinKey + R, tada tipo \ "shutdown-\"
If you made it in time, then the shutdown should have aborted. Jei to padaryti laiku, tada išjungti turi būti nutrauktas. Otherwise, buh-bye. Priešingu atveju, buh-bye.
Leave a reply Leave a Reply