12 Nov

All keyboards has LED so you can easily tell you if you have Numlock, Capslock and ScrollLock enabled/disabled. I found a small tool called Network Lights which really doesn’t do much except giving you a nice little indication on your network traffic by blinking your keyboard LEDs whenever you have outgoing or incoming packets on network interface.
This utility is a standalone executable. Run the program, you’ll see a new system tray icon. Now you can monitor your network traffic using the ScrollLock and NumLock LEDs on your keyboard. You can use the system tray icon (click the mouse) to customize program settings. If you have an older motherboard and your keyboard LED doesn’t blink when there are network traffic, try going to Settings and enable “Force Keyboard Capture” option.

Network Lights is only 96KB in size and takes only 1MB of memory when it is running. Lasted updated on June 2006 but I’ve tested it on Windows XP and Windows 7, both seems to work without problems. I am not sure which network connection it will indicate if you have more than 1 network connection. I bet this program will make your keyboard looks cool especially at night when all lights are turned off.
: Copying this article to your website is strictly NOT allowed. However, if you like this article, you can use the HTML code below to directly link to this article.
Encrypt MSN Chat for Security and Privacy Detect Packet Errors in Your Network LAN Connection Status Check Gmail through The Bat! email client List of Keyboard Shortcuts To Help You Speed Up Your Computing Tasks How to Receive Webmails (Hotmail, Yahoo, Gmail and etc) in Outlook Cracking WEP in 10 Minutes Video demo Test Open Port Forwarding for Your Router or Computer
Have computer technical problems? Get FREE help from Raymond.CC FORUM
28 Responses for "Keyboard LED as Indicator for Windows Incoming and Outgoing Network Packets"
great Ray..its working but i think key board light are not for this purpose…they r not modem light
there is every chance of them getting fuse
what say
pl comment Ray! i am afraid
i think blink rate can be increased from 100ms to 999ms
what say Ray
That’s pretty neat. On my laptop, the LEDs are not close enough together to be useful though.
Is there a way to get the standard blinky icon in windows 7? Right now all I see is the signal strength bars (I’m on wifi).
Thanks,
Tommy
I tested it is very beautiful, thanks Ray
nvm found one:
http://www.paulmather.net/lanlight.asp
Cooool Share ray
thanks a lot & keep Blinking
You can use iTraffic Monitor, as it does the same thing, but sits in the system tray and goes green when theres traffic, and pink when theres none
lol, i was just thinking about that last night, i found a program called lan light ntf http://www.dalesplace.net/download/lanlight.php but i did not try it yet … now i have 2 ways around that issue
thanks Ray
hi,
good one……
Nice utility.
its not working on my usb keyboard, my net is pppoe
That’s cool Ray! Last time, I’m also struggling with the connection of internet and it’s really frustrating because I wanna read some of my emails. Good thing that you introduced this tools. I’ll try for my PC. Thank you very much Ray!
Great new one
brilliant share thx!!
Its cute
and its works!
thanks!
didnt work on my laptop(compaq presario v3000)! help anyone!! ray!
i want the same for monitoring HDD activities!!
Where??
This is sooo coool!
My connection is PPPoE also but my keyboard is ps/2 not usb..
alex_voyager, there are quite a few keyboard LED HDD indicators, freeware and paid for. Two which I have tried are:
1. O&O’s Drive LED2 which is available from a number of freeware sites such as;
http://o-o-driveled.en.softonic.com/
Note: (the latest, i.e. version 3, is paid for)
This can either place a small bar on screen (which you can place where you want and also opt to hide when you move the focus away from it or minimise leaving only the tray icon) to show individual disk’s activity or can use the keyboard’s Scroll Lock LED to show HDD activity. This is quite a big package and more complex than the one below but also allows many more options, such as displaying Network Drive activity. This usually needs a reboot to complete the installation and also doesn’t start automatically with Windows from the off. To start it with Windows either Right Click on the bar or on the Tray icon to access settings and Check Automatic Start.
2. http://forums.laptopvideo2go.com/topic/9538-keyboard-scroll-lock-led-hdd-activity-tool/
is a much simpler tool and doesn’t need installing, just extract it and run. Right Click on its Tray Icon for access to the only option of Start with Windows.
And of course, as usual, there’s always google (FYI, in case you haven’t heard about it, Google is this magic web site that allows you to search for just about anything
) if you want others to try. There are plenty out there, just search google with something like ;
keyboard led HDD disk activity
add +freeware to the end of the search line if you want to limit the results purely to freeware. However, I have found that it misses quite a few freeware offerings if this is added to the search line as not all sites have the term freeware in the right place for Google to catch it when it crawls sites.
Wow!
Soo cool!!
Thanks Ray!!
Ray, I tried Network Light about a week ago to do the same.
However on my compuer at least it would sometimes interfere with normal keypresses – sometimes I would press a key and it would not register.
So I am currently looking for a better solution.
Hi Ray, already try it and so… cute. But now I have to remove it from my system, my laptop’s keyboard often refuse me to catch the click on it.
1. Why can’t we make the Blink Duration less then 100ms? I, for example, have very bright LEDs and it would be better if I set it to 10, 20 or may be 50 ms.
2. Why not to use reverse indication here (XOR). If, e.g I set on, then NumLk LED should be on all the time, except packets are going (it’s turned off for Blink Duration time). This way it’s possible do not brake the main functionality of LED’s (indicating status of NumLk and ScrollLk, which is pretty static) and to show network activity at the same time.
Proposal, if you go to the download site you can download the necessary source files in VC++ and modify them yourself if you know how. Just look to the right of the program download link and you will see the link for a .zip of the source files.
I have had a quick look at the source code and everything appears pretty straightforward from a labelling point of view and shouldn’t be too hard to understand and modify for anyone conversant with Windows and VC++ or just C++.
Sorry, can’t be bothered to have a go myself as I have no need for the tool and have more important things, to me anyway, to waste my time on
. Of course, you could always send your suggestion directly to the maker via the download site, as that would likely prove more productive than posting your suggestion here. There is even an e-mail address directly underneath the download links in the Feedback section.
network-lights-src.zip file offered for download contains just only one CPP file (and its header file). It’s impossible to make a build with it. Lot of other files are missing.
There is even an e-mail address directly underneath the download links in the Feedback section.
It’s work,..thank you
Work’s for me, thanks. It’s very cute program.
Leave a reply